Portable Wearable Blanket (55"x69") Guidebook

Dec 3, 2025

Won’t work

Step 1: Check the controller

Please check the silicone power button is not wrapped in the product or placed near other heat sources, as overheating may trigger the self-protection mode.

Step 2: Unplug the power cord

Unplug the power cord, and then disconnect the cable.

Step 3: Check the power source

Reconnect the cable, press and hold the Power Button for 3 seconds to turn the blanket on. This should resolve most errors or black screen issues.

Step 4: Contact customer service team

If the issue persists after multiple attempts, please contact our customer service team for assistance.

Note: When the blanket is powered by the power bank, please do not charge other electronic devices at the same time as this may cause an error.

Won't heat evenly or warm enough

⭐Won't heat evenly

For optimal heating performance, please wear the blanket evenly.
Avoid excessive folding or twisting of it, and avoid putting heavy objects on it.

⭐Won't warm enough

When the weather is too cold or the room temperature is too low, please press the button on your blanket to set it for the highest heating level (04).

Note: Refer to the user manual for information on the exact location of the button and instructions on how to adjust the temperature, as they may vary by brand or model.

Wait for 15-20 minutes so your heated wearable heats up.
For better heat transfer, wear fitted clothing and wrap the blanket closely around your body.
If the warmth is still insufficient, you may cover it with other regular bedding products (e.g., blanket, comfortor, quilt, etc.) according to your personal needs for enhanced insulation.

Note: Please do not use your heated wearable with other heated products simultaneously.

First-time setup

⭐Packaging opening

When opening the packaging, please avoid damaging the product. Vacuum packing may slightly affect the fluffiness of the fabric; simply shake it out gently, and it will naturally restore fluffiness within 24-48 hours.

⭐The correct steps for powering on

⭐The portable wearable blanket supports two power options

Fixed power source:

Please connect the Connecting Cable ('5') to Power Connector ('3') and Adapter ('6') , then plug into an AC outlet (100~240V - 50/60Hz).
Press and hold the Power Switch ('2') for 3 seconds to turn the blanket on.

Portable power source:

Please connect the Power Connector ('3') to the Type-C plug of the Power Bank ('4'). Then, turn on the Power Bank.
Press and hold the Power Switch ('2') for 3 seconds to turn the blanket on.

Note: Smart Eco-Sleep Mode - After the blanket is turned off, the power bank will enter standby to save energy. Press the button on the blanket or replug the cable to reactivate power.

*For first use, please ensure the Power Bank ('4') is fully charged using our Adapter ('6') with Connecting Cable ('5').

Portable Blanket Usage Guidelines

⭐Temperature & Timing Settings

Press ☀ and hold the Power Button for 3 seconds to turn it on.
☀: Tap once to switch between 4 heat settings (01-02-03-04).
⏰: Tap once to switch between 4 time settings (1H-2H-3H-4H).
To turn off at any setting, press ☀ and hold the Power Button for 3 seconds.
The power will automatically turn off after 3 hours if no timer setting is selected.

Note: It is recommended to wear clothing when wearing the heated blanket to avoid low-temperature scalds.

⭐Power Bank Usage Guidelines

Due to shipping safety regulations, the Power Bank in the package may not be fully charged. For first use, please charge it with our adapter.
Smart Eco-Sleep Mode: After the blanket is turned off, the power bank will enter standby to save energy. Press the button on the blanket or replug the cable to reactivate power.

Do not charge any other devices when the Power Bank is powering the wearable blanket.
Do not simultaneously power the wearable blanket if the Power Bank is being charged.
Disconnect the Power Bank and Connecting Cable before washing the wearable blanket.

Why does the product size seem different than expected?

The Throw-size heated wearable shaggy sherpa blanket measures 55"x69" and fits a wide range of users.

When the side snap buttons are fully opened, it can also be used as a rectangular electric blanket, allowing you to switch between styles based on your needs.

Washing and Maintenance

Before washing, please unplug the power cord and power bank first.
Disconnect the cables. Allow your heated blanket to cool down for 20-30 minutes.
Keep the power bank and plug dry and away from water.

⭐Washing Instructions

Use the mesh laundry bag if machine wash.
Presoak in cold water with mild soap for 15 minutes.
Hand washing or machine washing on a gentle cycle with mild soap and cold water.
Rinse thoroughly in fresh cold water.
Spin dry and gently stretch to its original size. Avoid using a wringer to prevent damage.

⭐Drying Instructions

Air Drying: Hang over two parallel lines. Avoid using clothes pins.

Machine Drying:

Please use a household dryer only; do not use commercial or laundromat dryers.
Preheat the dryer on the low temperature setting for 2 minutes, then tumble dry the blanket.
Remove while still damp, gently stretch to its original size, and hang it on a line or shower rail to air dry completely.

Note: After washing and drying, ensure both the blanket and connector are completely dry before plugging it in.

⭐Maintenance

Ensure the product is completely cool and thoroughly dry before storing it.
Loosely loop the cord to prevent damage or tangling.
Store the product in a well-ventilated, dry area.

Note: For long-term storage, please avoid excessive folding or twisting of the product, and do not sit on it or place heavy objects on it to maintain optimal heating performance.