First-time setup 🌟Packaging opening When opening the packaging, please avoid damaging the product. Vacuum packaging may cause a 1–2" size variation. Simply shake it out gently, and it will naturally restore fluffiness within 24-48 hours. 🌟The correct steps for powering on Step 1: Please connect the coupler to the product securely before plugging it into a working power outlet. Step 2: Press ☀ and hold the Power Button for 3 seconds to turn it on. 🌟Temperature & Timing Settings ☀: Tap once to switch between 6 heat settings (01-02-03-04-05-06). ⏰: Tap once to switch between 4 time settings (2H-3H-4H-6H). To turn off at any setting, press ☀ and hold the Power Button for 3 seconds. The power will automatically turn off after 4 hours if no timer setting is selected. 🌟What if the controller feels too hot？ A. Turn OFF your electric blanket. B. Unplug the power cord of your electric blanket from the power outlet. C. Allow your electric blanket and controller to cool down for 20-30 minutes. D. Please check the controller is not wrapped in the product or placed near other heat sources when in use. Keep it visible during use. 🌟Why does the product size seem different than expected? When opening the packaging, please avoid damaging the product. Vacuum packaging may cause a 1–2" size variation. Simply shake it out gently, and it will naturally restore fluffiness within 24-48 hours. Won’t work What to do if a controller error code starting with 'F' (e.g., F1, F2, F3, etc.) appears or the screen goes black？ 🌟Step 1: Check the controller Please check the controller is not wrapped in the product or placed near other heat sources, as overheating may trigger the self-protection mode. 🌟Step 2: Unplug the power cord Unplug the power cord, and then disconnect the coupler. 🌟Step 3: Check the power source Confirm that you are using a 120V AC power source. Connect another working device to the same power outlet to confirm that the outlet is working. Reconnect the coupler, plug in the power outlet, and turn it back on. This should resolve most errors or black screen issues. 🌟Step 4: Contact customer service team If the issue persists after multiple attempts, please contact our customer service team for assistance. Won't heat evenly or warm enough 🌟Won't heat evenly For optimal heating performance, please lay the product flat during use. Avoid excessive folding or twisting of it, and do not sit on it or place heavy objects on it. 🌟Won't warm enough A. When the weather is too cold or the room temperature is too low, please press the Temperature Up button on your electric blanket to increase the temperature. Note: Refer to the user manual for information on the exact location of the Temperature Up button and instructions on how to adjust the temperature, as they may vary by brand or model. B. Wait for 10-15 minutes so your electric blanket heats up. C. If the warmth is still insufficient, you may pair it with other regular bedding products (e.g., blanket, comfortor, quilt, etc.) according to your personal needs for enhanced insulation. Note: Please do not use your electric blanket with other heated products simultaneously. 🌟Why is there no heating wire at the edge of the blanket? For safety, the heating wires are designed to stay a safe distance away from the edges, in line with safety requirements. That’s why the heating wires are concentrated in the main central area of the heated blanket, rather than extending all the way to the edges. 🌟Why does the temperature of the heated blanket suddenly change during use? If the product gets folded or the heating wires overlap, some areas may become warmer than others. This may activate safety protection, which temporarily adjusts the product to a safer temperature. To help maintain even heating, avoid folding or twisting the product during use and keep it laid flat. 🌟Why does b1 code or "88" appear after powering on? These codes are part of the normal self-check process and are not errors. Once complete, turn the product back on, select your desired heat level, and use as usual. Washing and Maintenance 🌟Warning A. Before cleaning, please unplug the power cord first. B. Disconnect the coupler. Allow your electric blanket to cool down for 20-30 minutes. C. Keep the controller and plug dry. 🌟Washing Instructions A. Presoak in cold water with mild soap for 15 minutes. B. Machine washing on a gentle cycle with mild soap and cold water. C. Rinse thoroughly in fresh cold water. D. Spin dry and gently stretch to its original size. Avoid using a wringer to prevent damage. 🌟Drying Instructions Air Drying: Hang over two parallel lines. Avoid using clothes pins. Machine Drying: A. Please use a household dryer only; do not use commercial or laundromat dryers. B. Preheat the dryer on the low temperature setting for 2 minutes, then tumble dry the electric blanket. C. Remove while still damp, gently stretch to its original size, and hang it on a line or shower rail to air dry completely. Note: After washing and drying, ensure both the blanket and coupler are completely dry before plugging it in. 🌟Maintenance A. Ensure the product is completely cool and thoroughly dry before storing it. B. Loosely loop the cord to prevent damage or tangling. C. Store the product in a well-ventilated, dry area. Note: For long-term storage, please avoid excessive folding or twisting of the product, and do not sit on it or place heavy objects on it to maintain optimal heating performance.

First-time use 🌟Packaging opening When opening the packaging, please avoid damaging the product. Vacuum packaging may cause a 1–2" size variation. Simply shake it out gently, and it will naturally restore fluffiness within 24-48 hours. 🌟The correct steps for powering on Step 1: Please connect the coupler to the product securely before plugging it into a working power outlet. Step 2: Press the Power or ON/OFF button on your heated mattress pad to turn it ON. Note: Refer to the user manual for information on the exact location of the Power or ON/OFF button, as it may vary by brand or model. Step 3: Press the Temperature Up or Down button on your heated mattress pad to adjust the temperature. Note: Refer to the user manual for information on the exact location of the Temperature Up or Down button and instructions on how to adjust the temperature, as they may vary by brand or model. Allow your heated mattress pad to reach the desired level. 🌟What if the controller doesn't match the product? A. Please check that the MODEL NUMBER on the product label matches the MODEL NUMBER on the back of the controller. If there are any issues, please contact our customer service team. B. Please use the included Bedsure controller, and do not use controllers from any other brand. 🌟What are the correct steps for powering on? First, place the foot tag of the heated mattress pad at the foot of the bed. Next, pull the coupler through the bed skirt opening near the bottom of the headboard side. Then, securely connect the controller to the product’s coupler and plug it in. Turn it on to start using it. 🌟How to use the controller? Press the power button to turn it on. You can choose from 10 heat levels. Use the “+” and “−” buttons on the upper section to adjust the temperature for the body heating zone. Use the “+” and “−” buttons on the lower section to adjust the temperature for the feet heating zone. To set the timer, use the “+” and “−” buttons in the timer section. you can choose from 1 to 12 hours. 🌟What if the controller feels too hot？ A. Turn OFF your heated mattress pad. B. Unplug the power cord of your heated mattress pad from the power outlet. C. Allow your heated mattress pad and controller to cool down for 20-30 minutes. D. Please check the controller is not wrapped in the product or placed near other heat sources when in use. Keep it visible during use. 🌟Why does the product size seem different than expected? For heated mattress pads, please confirm the size of your bed before purchasing. Our products are designed to match standard bed sizes (Twin/Twin-XL/Full/Queen/King) precisely. 🌟Can the heated mattress pad be used with other bedding? Yes, it can be used with regular bedding like sheets, blankets, and comforters. However, please do not use it with other heated products simultaneously. Won’t work 🌟Step 1: Check the controller Please check the controller is not wrapped in the product or placed near other heat sources, as overheating may trigger the self-protection mode. 🌟Step 2: Unplug the power cord Unplug the power cord, and then disconnect the coupler. 🌟Step 3: Check the power source Confirm that you are using a 120V AC power source. Connect another working device to the same power outlet to confirm that the outlet is working. Reconnect the coupler, plug in the power outlet, and turn it back on. This should resolve most errors or black screen issues. 🌟Step 4: Contact customer service team If the issue persists after multiple attempts, please contact our customer service team for assistance. Won't heat evenly or warm enough 🌟Won't heat evenly For optimal heating performance, please lay the product flat during use. Avoid excessive folding or twisting of it. 🌟Won't warm enough A. When the weather is too cold or the room temperature is too low, please press the Temperature Up button on your heated mattress pad to increase the temperature. Note: Refer to the user manual for information on the exact location of the Temperature Up button and instructions on how to adjust the temperature, as they may vary by brand or model. B. Wait for 10-15 minutes so your electric blanket heats up. C. If the warmth is still insufficient, you may pair it with other regular bedding products like sheets, blankets, and comforters according to your personal needs for enhanced insulation. Note: Please do not use your heated mattress pad with other heated products simultaneously. 🌟Why are the power cables of the Queen/King heated mattress pad a bit tangled? A. The Twin/Twin-XL/Full size heated mattress pad has one controller. B. The Queen/King size heated mattress pad has two controllers, each corresponding to a separate heating zone on the left and right sides. Please connect the coupler, route the power cable to the left, and place one controller at the left head of the bed. Position the other controller on the right, with the power plug connected to the outlet on the right.This ensures independent control of temperature and timer for each side. 🌟Why does the Queen/King heated mattress pad only heat half the area? The Queen/King heated mattress pad has two controllers, each controlling the temperature and timer for its respective sides. Please ensure the power cables are correctly connected, and both controllers are turned on for full coverage. Washing and Maintenance 🌟Warning A. Before cleaning, please unplug the power cord first. B. Disconnect the coupler. Allow your heated mattress pad to cool down for 20-30 minutes. C. Keep the controller and plug dry. 🌟Washing Instructions A. Presoak in cold water with mild soap for 15 minutes. B. Machine washing on a gentle cycle with mild soap and cold water for several minutes. C. Rinse thoroughly in fresh cold water. D. Spin dry and gently stretch to its original size. Avoid using a wringer to prevent damage. 🌟Drying Instructions Air Drying: Hang over two parallel lines. Avoid using clothes pins. Machine Drying: A. Please use a household dryer only; do not use commercial or laundromat dryers. B. Preheat the dryer on the low temperature setting, then tumble dry the heated mattress pad. C. Remove while still damp, gently stretch to its original size, and hang it on a line or shower rail to air dry completely. Note: After washing and drying, ensure both the heated mattress pad and coupler are completely dry before plugging it in. 🌟Maintenance A. Ensure the product is completely cool and thoroughly dry before storing it. B. Loosely loop the cord to prevent damage or tangling. C. Store the product in a well-ventilated, dry area. Note: For long-term storage, please avoid excessive folding or twisting of the product, and do not place heavy objects on it to maintain optimal heating performance.

First-time setup 🌟Packaging opening When opening the packaging, please avoid damaging the product. Vacuum packaging may cause a 1–2" size variation. Simply shake it out gently, and it will naturally restore fluffiness within 24-48 hours. 🌟The correct steps for powering on Step 1: Please connect the coupler to the product securely before plugging it into a working power outlet. Step 2: Press the Power or ON/OFF button on your heated comforter to turn it ON. Note: Refer to the user manual for information on the exact location of the Power or ON/OFF button, as it may vary by brand or model. Step 3: Press the Temperature Up or Down button on your heated comforter to adjust the temperature. Note: Refer to the user manual for information on the exact location of the Temperature Up or Down button and instructions on how to adjust the temperature, as they may vary by brand or model. Allow your heated comforter to reach the desired level. 🌟Two Ways to Use the Heated Comforter Option 1: Use without a duvet cover. Twin/Full Size: Queen/King Size: Arrange the cord as shown in the illustration, making sure the coupler faces upward. Option 2: Use with your own duvet cover. Follow these steps: Step 1: Fasten the 8 loops on the heated duvet insert to the ties inside the duvet cover. Step 2: Choose the bottom loop that best matches the zipper side of your duvet cover, then secure the power cord. Twin/Full Size: Queen/King Size: Arrange the cord as shown in the illustration, making sure the coupler faces upward. Step 3: The heated product is ready for use. 🌟What if the controller doesn't match the product? A. Please check that the MODEL NUMBER on the product label matches the MODEL NUMBER on the back of the controller. If there are any issues, please contact our customer service team. B. Please use the included Bedsure controller, and do not use controllers from any other brand. 🌟What if the controller feels too hot？ A. Turn OFF your heated comforter. B. Unplug the power cord of your heated comforter from the power outlet. C. Allow your heated comforter and controller to cool down for 20-30 minutes. D. Please check the controller is not wrapped in the product or placed near other heat sources when in use. Keep it visible during use. 🌟Why does the product size seem different than expected? Vacuum packaging may cause a 1–2" size variation. Simply shake it out gently, and it will naturally restore fluffiness within 24-48 hours. The size of the heated comforter should be selected based on gender, height, and weight. Please refer to the diagram below and choose the appropriate size (Twin/Full/Queen/King) according to your current situation. Won’t work What to do if a controller error code starting with 'F' (e.g., F1, F2, F3, etc.) appears or the screen goes black？ 🌟Step 1: Check the controller Please check the controller is not wrapped in the product or placed near other heat sources, as overheating may trigger the self-protection mode. 🌟Step 2: Unplug the power cord Unplug the power cord, and then disconnect the coupler. 🌟Step 3: Check the power source Confirm that you are using a 120V AC power source. Connect another working device to the same power outlet to confirm that the outlet is working. Reconnect the coupler, plug in the power outlet, and turn it back on. This should resolve most errors or black screen issues. 🌟Step 4: Contact customer service team If the issue persists after multiple attempts, please contact our customer service team for assistance. Won't heat evenly or warm enough 🌟Won't heat evenly For optimal heating performance, please lay the product flat during use. Avoid excessive folding or twisting of it, and do not sit on it or place heavy objects on it. 🌟Won't warm enough A. When the weather is too cold or the room temperature is too low, please press the Temperature Up button on your heated comforter to increase the temperature. Note: Refer to the user manual for information on the exact location of the Temperature Up button and instructions on how to adjust the temperature, as they may vary by brand or model. B. Wait for 10-15 minutes so your heated comforter heats up. C. If the warmth is still insufficient, you may pair it with other regular bedding products according to your personal needs for enhanced insulation. Note: Please do not use your heated comforter with other heated products simultaneously. 🌟Why is there no heating wire at the edge of the comforter? For safety, the heating wires are designed to stay a safe distance away from the edges, in line with safety requirements. That’s why the heating wires are concentrated in the main central area of the heated comforter, rather than extending all the way to the edges. 🌟Why does the temperature of the heated comforter suddenly change during use? If the product gets folded or the heating wires overlap, some areas may become warmer than others. This may activate safety protection, which temporarily adjusts the product to a safer temperature. To help maintain even heating, avoid folding or twisting the product during use and keep it laid flat. 🌟Why does b code or "88" appear (for example b3, b4, or 88) after powering on? These codes are part of the normal self-check process and are not errors. Once complete, turn the product back on, select your desired heat level, and use as usual. Washing and Maintenance 🌟Warning A. Before cleaning, please unplug the power cord first. B. Disconnect the coupler. Allow your heated comforter to cool down for 20-30 minutes. C. Keep the controller and plug dry. 🌟Washing Instructions A. Presoak in cold water with mild soap for 15 minutes. B. Machine washing on a gentle cycle with mild soap and cold water. C. Rinse thoroughly in fresh cold water. D. Spin dry and gently stretch to its original size. Avoid using a wringer to prevent damage. 🌟Drying Instructions Air Drying: Hang over two parallel lines. Avoid using clothes pins. Machine Drying: A. Please use a household dryer only; do not use commercial or laundromat dryers. B. Preheat the dryer on the low temperature setting for 2 minutes, then tumble dry the heated comforter. C. Remove while still damp, gently stretch to its original size, and hang it on a line or shower rail to air dry completely. Note: After washing and drying, ensure both the comforter and coupler are completely dry before plugging it in. 🌟Maintenance A. Ensure the product is completely cool and thoroughly dry before storing it. B. Loosely loop the cord to prevent damage or tangling. C. Store the product in a well-ventilated, dry area. Note: For long-term storage, please avoid excessive folding or twisting of the product, and do not sit on it or place heavy objects on it to maintain optimal heating performance.

First-time setup 🌟Packaging opening When opening the packaging, please avoid damaging the product. Vacuum packaging may cause a 1–2" size variation. Simply shake it out gently, and it will naturally restore fluffiness within 24-48 hours. 🌟The correct steps for powering on Step 1: Please connect the coupler to the product securely before plugging it into a working power outlet. Step 2: Press the Power or ON/OFF button on your electric blanket to turn it ON. Note: Refer to the user manual for information on the exact location of the Power or ON/OFF button, as it may vary by brand or model. Step 3: Press the Temperature Up or Down button on your electric blanket to adjust the temperature. Note: Refer to the user manual for information on the exact location of the Temperature Up or Down button and instructions on how to adjust the temperature, as they may vary by brand or model. Allow your electric blanket to reach the desired level. 🌟What if the controller doesn't match the product? A. Please check that the MODEL NUMBER on the product label matches the MODEL NUMBER on the back of the controller. If there are any issues, please contact our customer service team. -Throw/Twin/Full/Queen/King: B. Please use the included Bedsure controller, and do not use controllers from any other brand. 🌟What if the controller feels too hot？ A. Turn OFF your electric blanket. B. Unplug the power cord of your electric blanket from the power outlet. C. Allow your electric blanket and controller to cool down for 20-30 minutes. D. Please check the controller is not wrapped in the product or placed near other heat sources when in use. Keep it visible during use. 🌟Why does the product size seem different than expected? Vacuum packaging may cause a 1–2" size variation. Simply shake it out gently, and it will naturally restore fluffiness within 24-48 hours. The size of the heated blanket should be selected based on gender, height, and weight. Please refer to the diagram below and choose the appropriate size (Throw/Twin/Full/Queen/King) according to your actual situation. Won’t work What to do if a controller error code starting with 'F' (e.g., F1, F2, F3, etc.) appears or the screen goes black？ 🌟Step 1: Check the controller Please check the controller is not wrapped in the product or placed near other heat sources, as overheating may trigger the self-protection mode. 🌟Step 2: Unplug the power cord Unplug the power cord, and then disconnect the coupler. 🌟Step 3: Check the power source Confirm that you are using a 120V AC power source. Connect another working device to the same power outlet to confirm that the outlet is working. Reconnect the coupler, plug in the power outlet, and turn it back on. This should resolve most errors or black screen issues. 🌟Step 4: Contact customer service team If the issue persists after multiple attempts, please contact our customer service team for assistance. Won't heat evenly or warm enough 🌟Won't heat evenly 1、If you find your product isn't heating evenly, make sure to lay it flat during use. 2、Avoid excessive folding or twisting, and don't sit on the heating area or place heavy objects on top. This helps maintain optimal heating performance. 🌟Won't warm enough A. When the weather is too cold or the room temperature is too low, please press the Temperature Up button on your electric blanket to increase the temperature. Note: Refer to the user manual for information on the exact location of the Temperature Up button and instructions on how to adjust the temperature, as they may vary by brand or model. B. Wait for 10-15 minutes so your electric blanket heats up. C. If the warmth is still insufficient, you may pair it with other regular bedding products according to your personal needs for enhanced insulation. Note: Please do not use your electric blanket with other heated products simultaneously. 🌟Why is there no heating wire at the edge of the blanket? For safety, the heating wires are designed to stay a safe distance away from the edges, in line with safety requirements. That’s why the heating wires are concentrated in the main central area of the heated blanket, rather than extending all the way to the edges. 🌟Why does the temperature of the heated blanket suddenly change during use? If the product gets folded or the heating wires overlap, some areas may become warmer than others. This may activate safety protection, which temporarily adjusts the product to a safer temperature. To help maintain even heating, avoid folding or twisting the product during use and keep it laid flat. 🌟Why does b or d code appear (for example b1, b2, or b3) after powering on? These codes are part of the normal self-check process and are not errors. Once complete, turn the product back on, select your desired heat level, and use as usual. How to use the Velcro strip? Clean the furniture surface. Peel off the 3M backing and stick the pad to the desired spot. Press firmly for 3 to 5 seconds, making sure the edges are secure. Organize the power cord and attach the controller to the Velcro strip. Please Note: The adhesive is for one-time use. Avoid peeling or repositioning it after installation. Washing and Maintenance 🌟Warning A. Before cleaning, please unplug the power cord first. B. Disconnect the coupler. Allow your electric blanket to cool down for 20-30 minutes. C. Keep the controller and plug dry. 🌟Washing Instructions A. Presoak in cold water with mild soap for 15 minutes. B. Machine washing on a gentle cycle with mild soap and cold water. C. Rinse thoroughly in fresh cold water. D. Spin dry and gently stretch to its original size. Avoid using a wringer to prevent damage. 🌟Drying Instructions Air Drying: Hang over two parallel lines. Avoid using clothes pins. Machine Drying: A. Please use a household dryer only; do not use commercial or laundromat dryers. B. Preheat the dryer on the low temperature setting for 2 minutes, then tumble dry the electric blanket. C. Remove while still damp, gently stretch to its original size, and hang it on a line or shower rail to air dry completely. Note: After washing and drying, ensure both the blanket and coupler are completely dry before plugging it in. 🌟Maintenance A. Ensure the product is completely cool and thoroughly dry before storing it. B. Loosely loop the cord to prevent damage or tangling. C. Store the product in a well-ventilated, dry area. Note: For long-term storage, please avoid excessive folding or twisting of the product, and do not sit on it or place heavy objects on it to maintain optimal heating performance.

Usage Instructions Do not use sharp objects to open the package to avoid damage. Allow the foam to recover for 1 hour before gently unfolding it. Move the foam with the included non-woven pad. Avoid pressing your fingernails into the foam. Size Variation: Minor size variations of up to 1–2 inches may occur due to compression packaging and are considered normal. The product will regain its intended size after fully expanding. Expansion Instructions: Allow up to 48 hours for the foam to fully expand after unpacking. For faster recovery, gently fluff, knead, or pat any compressed areas. Size Guide: Refer to the size chart below for sizing information. What's Included -Bedsure 2-in-1 Mattress Topper: Includes 1 mattress cover and 1 foam insert. -Mattress Cover Only: Includes 1 mattress cover only. Please check your order upon delivery. If any item is missing, please contact our customer support team for assistance. FREE Mattress Organizer Included Care Instructions Odor Notice A slight odor from memory foam is normal and harmless. The foam is certified by OEKO-TEX® and CertiPUR-US® and contains no harmful substances. If desired, place the foam in a well-ventilated area for up to 48 hours to allow any initial odor to dissipate. Memory Foam Layer: Do not wash the memory foam layer. Mattress Pad Cover -Carefully remove the mattress pad cover from the memory foam layer before washing. -Use a large-capacity washing machine. -Machine wash separately in cold water on a gentle cycle. -Tumble dry low. Do Not -Do not bleach. -Do not dry clean. -Do not iron. -Do not use chlorine-based detergents.  

Sizing Instructions Appearance may vary by mattress size. Images shown are based on standard U.S. mattress dimensions.Kindly Note:- Slight size variations of 1–2 inches may occur due to the filling and vacuum compression.- The size will return to normal once fully expanded.- For King, Cal King, or Oversized King sizes, place the longer side across the bed’s width for better drape and coverage. Usage Instructions - For optimal cooling, use indoors with the air conditioner set to 78°F (25.6℃) or lower.- Can be used on its own—no duvet cover required. Color Instruction - The color of this product may appear slightly different on various monitors, but we believe it will exceed your expectations upon unboxing. Care Instructions - For best results, use a large front-loading washer.- Spot clean small stains; dry clean if needed.- Machine wash separately in cold water (≤86°F / 30°C). Avoid high heat to prevent shrinkage or damage to the filling.- Use a delicate or gentle cycle with low spin to reduce stretching or shifting.- Tumble dry on low (≤140°F / 60°C) with dryer balls to restore loft, or air dry flat or hanging.- Store in the provided bag in a cool, dry, and well-ventilated place. Important Notes - Do not use bleach (including chlorine), as it can weaken fibers, fade colors, or damage the fabric.- Do not iron.- Do not dry clean.- Avoid detergents or cleaners containing chlorine.

Give Your Neck Time to Adjust A suportive pillow can feel different from what you’re used to—and that’s completely normal. Start with the softer side first and use it for a few nights. As your neck adapts, try switching to the firmer side for deeper support. Think of it as easing into a new sleeping experience. A little time can make a big difference. Normal Signs After Unboxing - Shipped compressed. Allow it to lie flat for up to 24 hours to fully regain its shape. - A slight odor from memory foam is normal and harmless; the foam is made with spring water and contains no chlorides, mercury, or heavy metals. - Small surface pores may appear during production, which is normal and does not affect use.- The pillow is certified by OEKO-TEX and CertiPUR-US for safe. Medical Reminder: Not a medical device. Consult a doctor for cervical spine issues. If you still find the hardness uncomfortable after 24 days, please don’t hesitate to contact us. We’re happy to provide personalized tips or arrange a return/replacement — your comfort is our priority. Product Information -Easy Adjustment Start with the Comfort Side and transition to the Dual-Core Support Side as your body adapts to increased support. - Choose The side That Tits Your Needs: ·Dual-Core Support Side: Provides enhanced neck support and alignment. ·Soft Side: Offers a gentler feel for everyday comfort. - Stable Neck Support The OLoop design helps support the head and neck while promoting natural alignment. - For Side & Back Sleepers Dedicated support zones help provide comfort and support in different sleeping positions. Care Instructions Note: Machine wash the pillowcase and tumble dry on low. Avoid washing or exposing the pillow insert to direct sunlight. - Remove the foam and filling, and machine wash the cover separately in cold water. - Delicate cycle. Do not bleach. - Tumble dry low. Reshape as needed. - Do not machine wash or dry the foam core.

Sizing Instructions  Appearance may vary by mattress size. Images shown are based on standard U.S. mattress dimensions. Kindly Note: - Slight size variations of 1–2 inches may occur due to the filling and vacuum compression.  - The size will return to normal once fully expanded.  - For King, Cal King, or Oversized King sizes, place the longer side across the bed’s width for better drape and coverage. Fluffing Instructions Designed for year-round use, providing balanced warmth and comfort. Note: - Vacuum-packed for shipping, the comforter may look flat or less fluffy at first—this is normal.  - Gently shake or fluff it, or let it rest for 24–48 hours to restore softness and loft. - Machine wash separately in cold water on a gentle cycle; tumble dry on low.    Color Instruction The color of this product may appear slightly different on various monitors, but we believe it will exceed your expectations upon unboxing.  Care Instructions - For best results, use a large front-loading washer.  - Spot clean small stains; dry clean if needed.  - Machine wash separately in cold water (≤86°F / 30°C). Avoid high heat to prevent shrinkage or damage to the filling.  - Use a delicate or gentle cycle with low spin to reduce stretching or shifting.  - Tumble dry on low (≤140°F / 60°C) with dryer balls to restore loft, or air dry flat or hanging. - Store in the provided bag in a cool, dry, and well-ventilated place.  Important Notes - Do not use bleach (including chlorine), as it can weaken fibers, fade colors, or damage the fabric.  - Do not iron.  - Do not dry clean.  - Avoid detergents or cleaners containing chlorine. 

How to Fluff Your Pillow Open carefully to avoid damage from sharp objects. Gently pat and shake to help it expand evenly. Allow 24–48 hours for full loft recovery. Machine wash and dry on low to restore fluff faster.       How to Care for Your Pillow Machine wash cold separately.Gentle cycle. Do not bleach.Tumble dry low. Do not ironDo not dry clean.Do not use chlorine-based detergents.   How to Match Your Pillowcase How to Measure: Use a tape measure to follow the pillow's curve.How to Match: Pillow 19” × 26” — Pillowcase 20” × 26” Pillow 19” × 28” — Pillowcase 20” × 30” Pillow 19” × 34” — Pillowcase 20” × 36”     The completed outfit is as follows.  

How to Fluff Your Mattress topper Vacuum-sealed for cleanliness and safe transport.May appear flat or less fluffy upon unpacking. This is normal and not a quality issue.  Proper Use: -Remove the product from the packaging and lay it.-Allow 24–48 hours for full loft recovery , or tumble dry on low heat for about 20 minutes to help fully.-Gently pat, shake, or fluff the surface to help it regain its shape more quickly.-Place it in a warm, airy spot to speed up the recovery process.   How to Match Your Mattress -Dimensions follow standard mattress sizes and fit beds.-After compression, slight size variations (±1–2 in) are normal and will return to standard once fully expanded.-Ensure the comforter matches your mattress size.-If it appears small at first, allow the filling to fully expand before adjusting.   Kindly Note First Few Days After Unpacking (“Awakening” Period): -May appear thin or slightly smaller—this is normal.-Wait at least 48 hours to see the full thickness and size.-Comfort typically improves after 2–3 nights of use.   How to Care for Your Mattress topper -Fluff or gently pat occasionally to maintain loft.-For better results, use a large front-loading washer.-Machine wash cold (≤30°C / 86°F) on a gentle cycle to prevent fabric shrinkage or damage to the filling. Tumble dry on low (<60°C / 140°F) with dryer balls, or air dry flat in the shade.-Use the delicate/gentle cycle and low spin speed to minimize stretching, pilling, or filling shift.-Do not bleach, dry clean, iron, or use chlorine-based detergents.  

Unpacking Instructions The comforter may appear flat or less fluffy at first due to vacuum packing — this is normal. Gently pat or shake it to restore its loft.- Made with genuine duck down, it may have a light natural scent when first opened. Air it out for a few hours or tumble dry on low with dryer balls for about 15 minutes to refresh and fluff.- Tested to meet OEKO-TEX® Standard 100, ensuring it is free from harmful substances and unpleasant odors.     Usage Instructions If an unpleasant odor occurs, fold and compress the comforter to force out odors, air out for 3-4 hours in a well-ventilated area.- Zoned filling provides targeted warmth, with denser fill along the edges for a natural drape. The gravity-inspired seal design helps retain heat and block drafts throughout the night.- Use a duvet cover to help extend the comforter’s lifespan.- For King or Oversized King sizes, place the long side across the bed’s width for a natural drape and full coverage.   Care Instructions For best results, use a large front-loading washer.- Spot clean small stains; dry clean if needed.- Machine wash separately in cold water (≤86°F / 30°C). Avoid high heat to prevent shrinkage or damage to the filling.- Use a delicate or gentle cycle with low spin to reduce stretching or shifting.- Tumble dry on low (≤140°F / 60°C) with dryer balls to restore loft, or air dry flat or hanging.- Store in the provided bag in a cool, dry, and well-ventilated place.     Important Notes Do not use bleach (including chlorine), as it can weaken fibers, fade colors, or damage the fabric.- Do not iron.- Do not dry clean.- Avoid detergents or cleaners containing chlorine.